Once you have enabled jumbo frames on the physical switch we should proceed by enabling them within vSphere and the VM.
To turn on jumbo frames for a specific vSwitch within vSphere: From within the vSphere Web Client go to: Manage >> Networking >> Virtual Switches >> Edit settings of desired vSwitch >> Properties >> Change the MTU parameter. This configuration will then apply to all physical NICs connected to the vSwitch.
To turn on jumbo frames for a specific VM running Server 2012:
From within Device Manager identify the virutal NIC - Right-hand click >> Properties >> Advanced >> Jumbo Packet.
0 comments:
Post a Comment