** Fornote: I do not beleive this works on ESXI 5.5/6.0+. Instead take a look at: HP Agentless Management Service Offline Bundle http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=MTX_b05d4c644fb742aa87cb5f5da1#tab1 **
HP have provided a utility that allows you to remotely collect hardware diagnostic logs from an ESXI host.
We should firstly download the utility as below:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=5351&prodSeriesId=1121516&swItem=MTX-b677f47e08794b8cba62d12c3f&prodNameId=3288134&swEnvOID=4115&swLang=8&taskId=135&mode=4&idx=2
We should then launch the HP Remote System Managment CLI and export the relevent logs:
Array Controller and Harddrive LOGS and Status:
hprsmcli -s xx.xx.xx.xx -u root -p password -o ArrayLogs.txt -f TEXT -t SA
System Fan LOGS and Status:
hprsmcli -s xx.xx.xx.xx -u root -p password -o FAN.txt -f TEXT -t FAN
ILO LOGS and Status:
hprsmcli -s xx.xx.xx.xx -u root -p password -o ILO.txt -f TEXT -t ILO
MEMORY LOGS and Status:
hprsmcli -s xx.xx.xx.xx -u root -p password -o MEMORY.txt -f TEXT -t MEMORY
OA LOGS and Status:
hprsmcli -s xx.xx.xx.xx -u root -p password -o OA.txt -f TEXT -t OA
CPU LOGS and Status:
hprsmcli -s xx.xx.xx.xx -u root -p password -o CPU.txt -f TEXT -t CPU
Fiber channel HBA LOGS and Status:
hprsmcli -s xx.xx.xx.xx -u root -p password -o FC.txt -f TEXT -t FC
NIC LOGS and Status:
hprsmcli -s xx.xx.xx.xx -u root -p password -o NIC.txt -f TEXT -t NIC
Power Supply LOGS and Status:
hprsmcli -s xx.xx.xx.xx -u root -p password -o PSU.txt -f TEXT -t PS
Server Firmware LOGS and Status:
hprsmcli -s xx.xx.xx.xx -u root -p password -o Firmware.txt -f TEXT -t SF
Server Temperature LOGS and Status:
hprsmcli -s xx.xx.xx.xx -u root -p password -o TEMP.txt -f TEXT -t TEMP
ML LOGS:
hprsmcli -s xx.xx.xx.xx -u root -p password -o iml.xml -f TEXT -t IML
Export ALL of the logs:
hprsmcli -s xx.xx.xx.xx -u root -p password -o AllLogs.txt -f TEXT
0 comments:
Post a Comment